Credit Card

Credit Card: Create

important

Typically requires PCI SAQ D compliance

We recommend using paymentMethod functions to avoid any PCI concerns with raw credit card data being present on your server.

  1. Node
let creditCardParams = {
  customerId,
  number: '4111111111111111',
  expirationDate: '06/2022',
  cvv: '100'
};

gateway.creditCard.create(creditCardParams, (err, response) => {
});
Parameters
billingAddress
A billing address associated with a specific customer ID. It can be further associated with a specific payment method. The maximum number of addresses per customer is 50.
companyString
Company name. 255 character maximum.
countryCodeAlpha2String

The ISO 3166-1 alpha-2 country code specified in an address. The gateway only accepts specific alpha-2 values.

countryCodeAlpha3String

The ISO 3166-1 alpha-3 country code specified in an address. The gateway only accepts specific alpha-3 values.

countryCodeNumericString

The ISO 3166-1 numeric country code specified in an address. The gateway only accepts specific numeric values.

countryNameString

The country name specified in an address. We only accept specific country names.

extendedAddressString
The extended address information—such as apartment or suite number. 255 character maximum.
firstNameString
The first name. 255 character maximum.
internationalPhone
The phone number that belongs to the address that is structured with country code and national number.
countryCodeString
Country code of phone number. 1-3 digits. Required.
nationalNumberString
National number of phone number. 4-12 digits. Required.
lastNameString
The last name. 255 character maximum.
localityString
The locality/city. 255 character maximum.
phoneNumberString

Deprecated.

We recommend using international_phone. This functionality still exists in the gateway but is no longer documented. This parameter will be removed in the future.

postalCodeString
The postal code. Postal code must be a string of 4-9 alphanumeric characters, optionally separated by a dash or a space. Spaces and hyphens are ignored.
regionString
The state or province. 255 character maximum.
streetAddressString
The billing street address. 255 character maximum. Required to perform card verification when AVS rules are configured to require street address.
billingAddressIdString
The two-letter value for an address associated with a specific customer ID. The maximum number of addresses per customer is 50.
cardholderNameString
The cardholder name associated with the credit card. 175 character maximum.
customerIdString
A string value representing an existing customer in your Vault that you want to add a credit card for.
cvvString

A 3 or 4 digit card verification value assigned to credit cards. The CVV will never be stored in the gateway, but it can be provided with one-time requests to verify the card.

expirationDateString

The expiration date, formatted MM/YY or MM/YYYY. May be used instead of expirationMonth and expirationYear.

expirationMonthString

The expiration month of a credit card, formatted MM. May be used with expirationYear, and instead of expirationDate.

expirationYearString

The two or four digit year associated with a credit card, formatted YYYY or YY. May be used with expirationMonth, and instead of expirationDate.

numberString

The 12-19 digit value consisting of a bank identification number (BIN) and primary account number (PAN). Passing the number directly (rather than passing a nonce) should only be done in a PCI compliant environment. If in doubt, use paymentMethodNonce with Payment Method: Create

options
Optional values that can be passed with a request.
failOnDuplicatePaymentMethodbool
If this option is passed and the same payment method has already been added to the Vault for any customer, the request will fail.
failOnDuplicatePaymentMethodForCustomerbool
If this option is passed and the same payment method has already been added to the Vault for the same customer, the request will fail. This option can only be used for customers with at most 100 credit cards, cannot be used in combination with the fail_on_duplicate_payment_method option, and is ignored for PayPal, Pay with Venmo, Apple Pay, Google Pay, Samsung and ACH payment methods.
makeDefaultbool
This option makes the specified payment method the default for the customer.
skipAdvancedFraudCheckingboolean

Prevents the verification from being evaluated as part of Premium Fraud Management Tools checks. Use with caution – once you've skipped checks for a verification, it is not possible to run them retroactively.

verificationAmountString
Specify a non-negative amount that you want to use to verify a card. If you do not pass this option, the gateway will automatically use a verification amount of $0 or $1, depending on the processor and/or card type.
verificationMerchantAccountIdString

Specify the merchant account ID that you want to use to verify a card. See the merchantAccountId on Transaction: Sale to learn more. The merchant account can't be a marketplace sub-merchant account. See the Braintree Marketplace Guide to learn more.

verifyCardbool

This option prompts the gateway to verify the card's number and expiration date. It also verifies the AVS and CVV information if you've enabled AVS and CVV rules.

note

Braintree strongly recommends verifying all cards before they are stored in your Vault by enabling card verification for your entire account in the Control Panel.

In some cases, cardholders may see a temporary authorization on their account after their card has been verified. The authorization will fall off the cardholder's account within a few days and will never settle.

Only returns a Credit Card Verification result if verification runs and is unsuccessful.

paymentMethodNonceString
One-time-use reference to card information provided by your customer.
threeDSecureAuthenticationIdString
ID of the 3D Secure authentication performed for creating this credit card. Do not provide this field if you are using a payment_method_nonce that is 3D Secure enriched.
threeDSecurePassThru

Results of a merchant-performed 3D Secure authentication. You will only need to use these fields if you've performed your own integration with a 3D Secure MPI provider (e.g. Cardinal Centinel). Otherwise, Braintree's SDKs handle this for you in our standard 3D Secure integration.

cavvString

Cardholder authentication verification value or CAVV. The main encrypted message issuers and card networks use to verify authentication has occurred. Mastercard uses an AVV message and American Express uses an AEVV message, each of which should also be passed in the cavv parameter.

dsTransactionIdString

Transaction identifier resulting from 3D Secure 2 authentication. This field must be supplied for Mastercard Identity Check.

eciFlagString

The value of the electronic commerce indicator (ECI) flag, which indicates the outcome of the 3DS authentication.

Accepted values for Mastercard:

  • 00 = Failed or not attempted
  • 01 = Attempted
  • 02 = Success
  • 04 = Data-Only (Applies to limited processors)

Accepted values for all other card brands:

  • 07 = Failed or not attempted
  • 06 = Attempted
  • 05 = Success
threeDSecureVersionString

The version of 3D Secure authentication used for the transaction. Required on Visa and Mastercard authentications. Must be composed of digits separated by periods (e.g. 1.0.2).

xidString

Transaction identifier resulting from 3D Secure authentication. Uniquely identifies the transaction and sometimes required in the authorization message. Must be base64-encoded. This field will no longer be used in 3D Secure 2 authentications.

tokenString

An alphanumeric value that references a specific payment method stored in your Vault. Must be less than or equal to 36 characters. If using a custom integration, you can specify what you want the token to be. If not specified, the gateway will generate one that can be accessed on the result. If using our Drop-in UI with a customer ID to vault payment methods, you can't specify your own token. Length and format of gateway-generated tokens and IDs may change at any time.

Payment method nonces vs. raw card dataanchor

While it is possible to pass both raw card data and a payment method nonce in the same call, we recommend passing only a payment method nonce.

Passing both will result in a payment method that has a mix of their attributes, with precedence given to the fields individually, then to the attributes of the payment method nonce. For example, if you pass both a card number and a payment method nonce, the payment method will have the number you passed explicitly, but the rest of the attributes will be obtained through the nonce.